PhD With Me 🔬

Objectives

Objective 1: Design and Fabricate 'Scaled up' Devices:

Create a dataset of metasurface designs and experimentally cross-validate electromagnetic responses

Objective 1a:

Using forward design, create simulations well matched to external quantum efficiency measurements for a variety of PV cells beginning with Si and GaAs.

Quantify the match between target and attained absorptivity response curves in terms of overlapping areas and mean square error.

Objective 1b:

Fabricate three proposed designs in year 1 (2024) using photolithography and other readily available techniques.

Use results from completed Metamaterial-Surface Acoustic Wave (SAW) experiments to propose suitable sensing applications for these devices.

Objective 2: Through simulation, demonstrate correspondence between scaled up and scaled down versions of unit cell geometries.

Seek to represent the mathematical relationship between geometrical features and resonant frequencies (wideband or narrowband), thereby demonstrating tunability.

Objective 3: 'Scaled down' Fabrication and Characterisation:

Expand the frameworks - design, fabrication, characterisation.

Objective 3a:

By end of year 3 (2026) fabricate three nano-structured metasurface designs using Nano Imprint Lithography (NIL), Focused-lon Beam (FIB), or Electron Beam Lithography (EBL).

Assess each design / fabrication method in terms of throughput and suitability for commercial manufacture, within the context of the intended application.

Objective 3b:

Characterise nanoscale structures and measure suppression of thermalisation losses in terms of system efficiency gain, by comparing metasurface-TPV to standalone PV cells.