nanojet summary
here's a summary of the disk sizes you can create in patterned photoresist using the described techniques:
Nanosphere/Microsphere Photolithography Techniques:
General Principle: These techniques use micro- or nanospheres as lenses to focus light onto a photoresist, creating patterns. The size of the resulting features (holes or disks after lift-off) is related to the sphere diameter, but also other parameters like the exposure, the developing time or the used setup.
Wu et al. (Nanoscale Res Lett. (2008) 3:351-354 ): They made holes in photoresist about 180 nm diameter by lift off and using the nanosphere Photolithography . The period was about 1 um
Wu et al. (Nanotechnology 18 (2007) 485302): They were able to generate holes in the range about 250nm. It could make holes smaller with tunnable period.
Chang et al. 2013: Reported fabricating Au nanodisks down to sub-100 nm scale, With tunning, disk diameter can range down to 78 nm
Wu at al, Nanoscale res lett (2008) 3.123-127 They report of Hole of diameter Sub 250 nm.
Geng, at al "Large-Area and Ordered Sexfoil Pore Arrays by Spherical-Lens Photolithography": In this study they achieve sexfoil shapes, sizes depend of exposure time and duration. They use spere of 2um diameter.
Ayenew et al. "Self-organized nanoparticle photolithography": By chosing adequate parameter and materials they were able to generate patern down to 420 nm. with 750 nm period. With tuning down to 400 nm-800 nm. In Summary:
You can achieve disks with diameters significantly smaller than the microspheres used.
The smallest reported disk sizes are in the sub-100 nm range, with tuning as low as ~78 nm.
Control the expsure time, developement duration and the type of microphere and ligth.
It's crucial to note that these methods offer tunability. The precise control of exposure time, development conditions, and sphere size will allow fine-tuning within the stated ranges.