PhD With Me 🔬

AFM tips 2

Hello all,

The Scanasyst air tips from Bruker, for our new Bruker AFM Dimension Edge, are good but it does take a long time to get them from Germany. A uk based AFM probes shop called Apex (that we already have in our purchasing system), offers alternative tips suitable for the PeakForce mode (also called ScanAsyst) in air, that are much quicker to get than the Bruker ones. Please see here the link to all the suitable tips (low elastic constant at less than 1 and high resonance frequency above 50kHz), the type that I recommend, which is similar to the Bruker one (triangular cantilever) and at a reasonable price, is this one. If you want the original Bruker ScanAsyst air, the link is here, in theory these should have a 2nm tip rather than less than 10nm like the ones I suggest, but I am not sure their 2nm is actually real. However, if you want to order these, be prepared to wait 2 months or more to get them (sometimes is more or less than that).

Cheers

P.S. if you have “non-ordinary” material, such as sticky stuff, super smooth nano grains, liquid etc. have a chat with me first, because likely the standard PeakForce tips are not going to be suitable for your needs. Also we can ask our AFM expert for some advice about difficult samples.

P.P.S. The video is short but very useful to understand the basic principles of our new machine. Link